Hi,

I wanted to ask if someone face that problem. We are at View 7.10 and UAG 3.7. and Vsphere 6.0 U3. All machines are Instant clones.

What we are facing is that if I'm using  lView client 5.3 or 5.4 or 5.41 when connect to VM with VMware Blast the machine is only blinking (you see the Desktop but attempting to click on anything is not responsive) and technically is not usable. If I downgrade to View client 5.0 everything is working fine.

PCoIP works just fine. That is how I setup the users so they can use their VM's. I can't find anything related to this problem.

Please share if you have the same problem or find the solution.

Thanks in advance.

I am deploying UAG 3.9 using the powershell scripts supplied by VMware (as per Using PowerShell to Deploy VMware Unified Access Gateway ), but the scripts don't seem to work with v3.9 of the UAG. The DeploymentOption attribute in the OVA is no longer supported so the sections looking for onenic, twonic of threenic dont work. To get this to work I have modified the uagdeploy.ps1 script to avoid this deployment option. I changed these:

Remove line 201 $ovfOptions += " --deploymentOption=$deploymentOption"

Remove the switch statement in line 191 and just leave the three nic options

markbenson

Hello,

We have had UAG running for a while and it works fine using the full client but there has been a recent requirement for HTML Blast access for external users which does not work fine.

It's been enabled for a while as far as I'm concerned but we never tested it. Authentication works fine and users can see and select their desktop pool, it then takes them to a screen saying "Failed to resolve proxying route for request".

I have downloaded to log bundle but it's not revelaing very much at all. The last entry in the esmanager.log file says "Accessing virtual/rdsh desktop using protocol BLAST with ipAddress x.x.x.x (the connection server). The BG log file really doesn't say anything of note.

HTML access works fine internally if not using the UAG and there are no drops of any traffic on the firewalls. I do have a load balancer in place but I am bypassing that for now and just pointing at a single connection server, it makes no difference though.

Horizon 7.01

UAG 2.9

Cheers.

Hey Folks,

I'm trying to set up a UAG (3.9.1) for my users. In our environment we use smart cards, so I am attempting to configure X.509 and it is failing. If the UAG is configured with Username/Password it works fine.

I have a cert from external CA in "crt" format. Following the UAG Guide and setting up SAML, I am trying to convert the cert to one line PEM format and I dont know if I am doing this correctly.

The doc says:

If your certificate is in PKCS#12 (.p12 or .pfx) format, or after the certificate is converted to PKCS#12 format, use openssl to convert the certificate to .pem files.

For example, if the name of the certificate is mycaservercert.pfx, use the following commands to convert the certificate:

Where does one find the MSI? I have the EXE but does the "Silent Installation Properties for Horizon Agent" found here ( Silent Installation Properties for Horizon Agent  ) Apply?

We are running vmware horizon 7.8, with windows 10 1809 LTSC, non persistence linked clone pools.  We have fslogix setup and it seems to be working fine for all desktop icons, shortcuts, and internet favorites.  The issue we have is that on initial login, everything is great and works fast.  After the user logs off and back on, the start menu is blank.  None of the installed programs are there, only settings and search show up.  If I kill the explorer process and restart is, everything is fine.  I have tried a ton of different GPO settings and none ave any effect.

I am not sure if I should place anything in the redirections.xml file for fslogix, but I had this same issue with persona management and windows 10, but persona management has many other issues with windows 10 besides this.  So far FSLogix has been working fine, I just cannot figure out how to get the start menu to come up correctly after the user logs off and the vm rebuilds.

I have tried several different builds of windows 10 and they all end up doing the same thing.  It has to something in my setup.

I hava uninstalled VMware virtual audio [dev tap] driver now unable to reinstall and sound is muted unable to find drvers.

Using VMClient Horizon     

Hi,
We have a Horizon View 6. Connecting from PCoIP clients (Wyse/Samsung) throws "View Connection Server communication error" whereas there is no problem connecting from PC/iPad/iPhone with Horizon View Client or web browser.

On PCoIP client I have tried checking "do not verify server identity certificates" and also tried putting 443 or 4172 or 80 on the port for the View Connection Server but they throws same error.

Any help would be much appreciated, thank you.

I cannot access my work virtual machine from my macbook computer using VMware Horizon client 5.4 even though I am able to do so on my work laptop and other windows based laptops I have tried before. Any help would be greatly appreciated.

Hi Vmware Support,

I have installed Windows Server 2012 on Vmware and And also have installed Windows 7  on VMware, after configuring DHCP service on server 2012 i keep my client Ethernet properties on DHCP but it's not getting IP from my DHCP server getting APIPA IP. please help me how can i configure my network connection on VMware so that i can get IP from DHCP  server.

Thank you.

We have always had a postsync script for instant clones that also runs a gpupdate /force because sometimes group policy wouldn't update properly without it.  When trying the Horizon Agent 7.12 in a pool we have found that if the script has gpupdate in it the script will always fail.  If I remove that everything else works fine.  Has anyone else seen this issue?  Does anyone know if this is intentional?  I haven't had the opportunity to make sure that group policy always updates without it now as  this is just a test pool, so it may be moot, but I'm curious about this.

I've setup a Proof of Concept environment for Horizon 7.  I've got a test user successfully logging in and getting a desktop from either instant clone or linked clone pools.

I'm now trying to authenticate users using a 3rd Party SAML authenticator.  I've followed the scant documentation provided at Using SAML Authentication to setup a Static authenticator.  I've copied the metadata from hzn7-cs1.domain.com/SAML/metadata/sp.xml and sent it over to the IDP.  In Horizon View Administrator, the dashboard shows all services are in the green - including SAML.

In the metadata, I see the Assertion Consumer Service (ACS) URL:

<md:AssertionConsumerServiceBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST"Location="https://hzn7-cs1.cipherize.com/broker/xml"index="0"isDefault="true"/>

When I perform an IDP initiated login, I'm greeted by a 404 error when the IDP sends a POST to the specified Assertion Consumer Service (ACS) URL:

https://hzn7-cs1.cipherize.com/broker.xlm

Directly navigating to this ACS URL also returns a 404 - is this really the correct ACS URL?

What could be the issue?  Has anyone been able to get this working?

Thanks muchly,

AK.

Hi all, I have a Horizon 7.12 environment that I've been querying using the VMware PowerCLI, together with the VMware.Hv.Helper module. When I run the cmdlet Get-HVMachineSummary I don't get any user information being displayed. Does anyone know why this would be the case? I get 'Machine', 'DesktopPool', 'DNS Name', 'Host', 'Agent', 'Datastore', and 'Status' but no 'User' information.

Also, how can I get the 'Display Protocol' displayed, like it does in the Horizon Admin console?

Thanks in advance.

Hi,

I have a problem with the execution of the customization script of ClonePrep with Windows 7 SP1 full update.

With Windows 10 no problem!

I activated the full log mode and here is what I see in the file:

2020-04-08T18:10:27.728+02:00 DEBUG (0740-075C) <1884> [vmware-svi-ga] svmga::core::windows::Guest::SecureScript(): Script Name: Post-Customization, Script Path: "C:\Windows\Temp\Start.bat"

2020-04-08T18:10:27.728+02:00 DEBUG (0740-075C) <1884> [vmware-svi-ga] svmga::core::windows::Guest::SecureScript(): Failed Creating Post-Customization, Hash File: 0x80070003

...

2020-04-08T18:10:58.834+02:00 DEBUG (0740-075C) <1884> [vmware-svi-ga] svmga::core::windows::Guest::RunPostCustomizationScript(): Failed To Execute Post-Customization Script. It Was Not Secured

I tried to place the script in different places:

C: \ Windows \ Temp

C: \ ProgramData

And I always get the same error.

In the documentation it says:

Important:

Put the ClonePrep customization scripts in a secure folder to prevent unauthorized access.

What does secure folder mean?

What is the error I get indicating that the script is not secure?

And why don't I have this problem with Windows 10?

Thank you in advance for your help !

Hello,

I actually have a horizon server in domain "domainA". I have an other domain "domainB", i would like the users from domainB to use the horizon server.

At this point I have a bidirectional approbation between domainA and domainB. The new domain appears in the Horizon Administrator window but in red status saying "error cannot contact domain".

I disactivated firewall but its the same. I added in DNS domainB conditional redirects in domainA and vice versa.

The new domain doesnt appear in the domain list on the Horizon client.

Could you please help me ?

Thanks a lot

WHen I checked the VM is in error state in Horizon COnsole. While doing a recompose I am getting the error. "Failed to delete VM - Failed to resolve id of disk '".

WHen I checked the Persistent disk vmdk is also not in the Datastore, which is showing in horizon. The VM is turned off in vcenter.

Please help, how to retrieve the data

Has anyone had success with configuring RADIUS 2-Factor Auth on Horizon View 7?  I've been attempting to setup Duo on our pre-production HV7 environment and have had little success.

When trying to authenticate with 2-Factor enabled I receive a "Error Encountered While Authenticating" Alert from the Horizon Client.  A packet capture on the connection server shows no activity to or from our RADIUS server, its almost as if something in the application stack is broken.

Attached is a sample of what I've found in the debug logs, noting that there is an error at 2016-05-18T11:03:51.090-04:00 "Error setting up/performing authentication net.propero.portal.filters.ProperoAuthFilter.doFilter(SourceFile:472) java.lang.ArrayIndexOutOfBoundsException" and another at 2016-05-18T11:03:51.091-04:00  "Finished processing: submit-authentication, Result: error, Error Code: BROKER_DISABLED, Error Message: this broker currently disabled, User Message: Error encountered while authenticating".  I have submitted a ticket with VMware, but I'm curious to see if anyone else is experiencing the issue, this is a freshly built environment and not an upgrade from 6.

This is our current environment

• ESXi 6.7 Update 1 running on HPE DL380s Gen10 servers
• VMWare View 7.6.0
• VMWare Tools 10.2.5
• nVidia 7.0 - this includes the vib install on the ESXi hosts as well as the nVidia driver install under Windows
• Window 10 version 1709

I know when building a new master image, the order of install is:

1. VMware Tools
2. VMware View agents
3. nVidia drivers

Hello Everyone, was wondering if I could get some hep on this issue. We are trying to get one of our users set up at home on their Mac. We keep falling into an error when trying to connect her.

We have already trouble shooted and done the following.

- reinstall

- reboot

- pinged both servers, both available

- router reboot

- vdi.meddata.com

- changed certificate settings

- changing protocol settings

- adding vmware to accessibility list for full access

- installing 4.xx version

- clearing keys from security section of vmware preferences

- allowing permissions within OS preferences

- clearing application tools folder/cache folder/preferences folder after uninstall and reinstalling

- checked all VMWare settings and tested changing any/all of them

- using vdi.meddata.com (HTML5 not enabled on servers)

The following is the error log I keep getting.

Apr 02 15:59:55.450 -07:00: vmware-view 10428| Log for vmware-view pid=10428 version=4.10.0-11013656

Apr 02 15:59:55.451 -07:00: vmware-view 10428| MergePlist, com.vmware.view.plist doesn't exist

Apr 02 15:59:55.461 -07:00: vmware-view 10428| SetDefaultAppForURLScheme,LSSetDefaultHandlerForURLScheme returns:0

Apr 02 15:59:55.497 -07:00: vmware-view 10428| CdkServiceUser_Open: /Applications/VMware Horizon Client.app/Contents/Library/Open VMware View Client Services exit status 256.

Apr 02 15:59:55.497 -07:00: vmware-view 10428| CdkServiceUser_Open failed with error -1 (USB services may not yet have been initialized.)

Apr 02 15:59:55.501 -07:00: vmware-view 10428| Using OpenSSL 1.0.2p  14 Aug 2018

Apr 02 15:59:55.501 -07:00: vmware-view 10428| Using libcurl/7.61.1 OpenSSL/1.0.2p zlib/1.2.11

Apr 02 15:59:55.651 -07:00: vmware-view 10428| UDPProxy_Initialize: UDP proxy listening on local port 51599...

Apr 02 15:59:55.652 -07:00: vmware-view 10428| UDP proxy initialized OK, loopbackPort = 51599l

Apr 02 15:59:55.658 -07:00: vmware-view 10428| Smart card, -[CdkSCViewController refreshAllCertificates], searching identities...

Apr 02 15:59:55.672 -07:00: vmware-view 10428| Cert Expired

Apr 02 15:59:55.672 -07:00: vmware-view 10428| Processing Cert with Subject="/CN=com.apple.systemdefault/O=System Identity" and UPN="(null)"

Apr 02 15:59:55.673 -07:00: vmware-view 10428| DigitalSignature keyUsage not present

Apr 02 15:59:55.673 -07:00: vmware-view 10428| Processing Cert with Subject="/CN=com.apple.kerberos.kdc/O=System Identity" and UPN="(null)"

Apr 02 15:59:55.673 -07:00: vmware-view 10428| DigitalSignature keyUsage not present

Apr 02 15:59:55.673 -07:00: vmware-view 10428| Processing Cert with Subject="/C=US/O=Apple Computer, Inc./OU=Dashboard/CN=Dashboard Advisory" and UPN="(null)"

Apr 02 15:59:55.673 -07:00: vmware-view 10428| No valid client cert EKU present

Apr 02 15:59:55.673 -07:00: vmware-view 10428| Cert Expired

Apr 02 15:59:55.673 -07:00: vmware-view 10428| Cert Expired

Apr 02 15:59:55.673 -07:00: vmware-view 10428| Processing Cert with Subject="/C=US/O=Apple Inc./OU=Apple Certification Authority/CN=Apple Code Signing Certification Authority" and UPN="(null)"

Apr 02 15:59:55.673 -07:00: vmware-view 10428| No valid client cert EKU present

Apr 02 15:59:55.673 -07:00: vmware-view 10428| Processing Cert with Subject="/C=US/O=Apple Inc./OU=Apple Software/CN=Software Signing" and UPN="(null)"

Apr 02 15:59:55.673 -07:00: vmware-view 10428| No valid client cert EKU present

Apr 02 15:59:55.673 -07:00: vmware-view 10428| Processing Cert with Subject="/O=Apple" and UPN="(null)"

Apr 02 15:59:55.673 -07:00: vmware-view 10428| DigitalSignature keyUsage not present

Apr 02 15:59:55.673 -07:00: vmware-view 10428| Smart card, -[CdkSCViewController refreshAllCertificates], new size is 0

Apr 02 15:59:55.673 -07:00: vmware-view 10428| Smart card, -[CdkSCViewController refreshCertDynamicFlag], did not get any certficate

Apr 02 15:59:55.673 -07:00: vmware-view 10428| Smart card, -[CdkSCViewController refreshCertDynamicFlag], new size is 0

Apr 02 15:59:55.681 -07:00: vmware-view 10428| -[CdkWindowController init], Enable Greenbox Support: NO

Apr 02 15:59:55.688 -07:00: vmware-view 10428| -[CdkConfigureKeyboardAndMouseViewController init] current profile: 52fb9ad7-46c9-7780-4894-ddd3e155a740, returned profile: 52fb9ad7-46c9-7780-4894-ddd3e155a740.

Apr 02 15:59:55.946 -07:00: vmware-view 10428| -[CdkAppController applicationDidFinishLaunching:], KEY_LAUNCH_APP_QUIETLY:0

Apr 02 15:59:55.946 -07:00: vmware-view 10428| -[CdkWindowController observeValueForKeyPath:ofObject:change:context:], workspaceOneMode: 0

Apr 02 15:59:56.136 -07:00: vmware-view 10428| -[CdkUrlRedirectionController setDefaultAppForURLScheme:bundleId:],LSSetDefaultHandlerForURLScheme returns:0

Apr 02 16:00:37.619 -07:00: vmware-view 10428| CdkUtil_SetIpProtocolUsage: setting Dual as the addressing mode.

Apr 02 16:00:37.917 -07:00: vmware-view 10428| -[CdkWindowController serverTypeAction:]: Server type is View. Launching the broker session...

Apr 02 16:00:37.926 -07:00: vmware-view 10428| TaskCombiner: CdkGetLaunchItemsTask(TODO) added, group task num:1, total task num:1.

Apr 02 16:00:37.927 -07:00: vmware-view 10428| TaskCombiner: CdkGetUserGlobalPreferencesTask(TODO) added, group task num:2, total task num:2.

Apr 02 16:00:38.326 -07:00: vmware-view 10428| TaskCombiner: CdkGetTunnelConnectionTask(TODO) added, group task num:3, total task num:3.

Apr 02 16:00:38.326 -07:00: vmware-view 10428| TaskCombiner: Group Tasks(3):CdkGetLaunchItemsTask(TODO),CdkGetUserGlobalPreferencesTask(TODO),CdkGetTunnelConnectionTask(TODO),

Apr 02 16:00:38.329 -07:00: vmware-view 10428| TaskCombiner: CdkGetConfigurationTask(TODO) added, group task num:1, total task num:4.

Apr 02 16:00:38.330 -07:00: vmware-view 10428| TaskCombiner: CdkSetLocaleTask(TODO) added, group task num:2, total task num:5.

Apr 02 16:00:38.330 -07:00: vmware-view 10428| TaskCombiner: Group Tasks(2):CdkGetConfigurationTask(TODO),CdkSetLocaleTask(TODO),

Apr 02 16:00:38.330 -07:00: vmware-view 10428| TaskCombiner: CreateRequest for CdkSetLocaleTask(REDY).

Apr 02 16:00:38.331 -07:00: vmware-view 10428| Broker transport connected by: TCP

Apr 02 16:00:38.331 -07:00: vmware-view 10428| Connection types: Broker=CONNECTION_TYPE_TCP_ONLY Websocket=CONNECTION_TYPE_TCP_ONLY Data=CONNECTION_TYPE_MIXED_MODE

Apr 02 16:00:38.332 -07:00: vmware-view 10428| Send request successful: 0x604000a737c0

Apr 02 16:00:38.337 -07:00: vmware-view 10428| CdkUtil_SetLocalAddress: address ::1 is either a loopback or a wildcard address, not using it.

Apr 02 16:00:38.345 -07:00: vmware-view 10428| CdkRpc_HandleResponsesAsync: Handle Response with rpc call id: 1.

Apr 02 16:00:38.345 -07:00: vmware-view 10428| Got a response to request 1.

Apr 02 16:00:38.345 -07:00: vmware-view 10428| TaskCombiner: CdkGetLaunchItemsTask(FAIL) removed, group task num:2, total task num:4.

Apr 02 16:00:38.345 -07:00: vmware-view 10428| TaskCombiner: CdkGetUserGlobalPreferencesTask(FAIL) removed, group task num:1, total task num:3.

Apr 02 16:00:38.345 -07:00: vmware-view 10428| TaskCombiner: CdkGetTunnelConnectionTask(FAIL) removed, group task num:0, total task num:2.

Apr 02 16:00:38.345 -07:00: vmware-view 10428| TaskCombiner: CdkGetConfigurationTask(FAIL) removed, group task num:1, total task num:1.

Apr 02 16:00:38.345 -07:00: vmware-view 10428| -[CdkWindowController errorCallback:forTask:], CdkSetLocaleTask, type: 6, task error: Error: Couldn't connect to server, domain:cdk-curl-error-quark, code:7

Apr 02 16:00:39.464 -07:00: vmware-view 10428| -[CdkWindowController resetAutoReconnect], networkReachability is nil : 1 , autoReconnect : init

Apr 02 16:00:39.466 -07:00: vmware-view 10428| Disconnecting from broker https://desktop.meddata.com:443/broker/xml

Apr 02 16:00:39.466 -07:00: vmware-view 10428| CdkUtil_SetLocalAddress: fd -1 < 0, not retrieving local address.

Apr 02 16:00:40.760 -07:00: vmware-view 10428| -[CdkWindowController presentBrokerPrompt]

Apr 02 16:00:44.708 -07:00: vmware-view 10428| CdkUtil_SetIpProtocolUsage: setting Dual as the addressing mode.

Apr 02 16:00:44.780 -07:00: vmware-view 10428| -[CdkWindowController serverTypeAction:]: Server type is View. Launching the broker session...

Apr 02 16:00:44.782 -07:00: vmware-view 10428| TaskCombiner: CdkGetLaunchItemsTask(TODO) added, group task num:1, total task num:2.

Apr 02 16:00:44.783 -07:00: vmware-view 10428| TaskCombiner: CdkGetUserGlobalPreferencesTask(TODO) added, group task num:2, total task num:3.

Apr 02 16:00:45.117 -07:00: vmware-view 10428| TaskCombiner: CdkGetTunnelConnectionTask(TODO) added, group task num:3, total task num:4.

Apr 02 16:00:45.117 -07:00: vmware-view 10428| TaskCombiner: Group Tasks(3):CdkGetLaunchItemsTask(TODO),CdkGetUserGlobalPreferencesTask(TODO),CdkGetTunnelConnectionTask(TODO),

Apr 02 16:00:45.119 -07:00: vmware-view 10428| TaskCombiner: CdkGetConfigurationTask(TODO) added, group task num:1, total task num:5.

Apr 02 16:00:45.121 -07:00: vmware-view 10428| TaskCombiner: CdkSetLocaleTask(TODO) added, group task num:2, total task num:6.

Apr 02 16:00:45.121 -07:00: vmware-view 10428| TaskCombiner: Group Tasks(2):CdkGetConfigurationTask(TODO),CdkSetLocaleTask(TODO),

Apr 02 16:00:45.121 -07:00: vmware-view 10428| TaskCombiner: CreateRequest for CdkSetLocaleTask(REDY).

Apr 02 16:00:45.122 -07:00: vmware-view 10428| Send request successful: 0x604000076b80

Apr 02 16:00:45.141 -07:00: vmware-view 10428| CdkRpc_HandleResponsesAsync: Handle Response with rpc call id: 2.

Apr 02 16:00:45.141 -07:00: vmware-view 10428| Got a response to request 2.

Apr 02 16:00:45.141 -07:00: vmware-view 10428| TaskCombiner: CdkGetLaunchItemsTask(FAIL) removed, group task num:2, total task num:5.

Apr 02 16:00:45.141 -07:00: vmware-view 10428| TaskCombiner: CdkGetUserGlobalPreferencesTask(FAIL) removed, group task num:1, total task num:4.

Apr 02 16:00:45.141 -07:00: vmware-view 10428| TaskCombiner: CdkGetTunnelConnectionTask(FAIL) removed, group task num:0, total task num:3.

Apr 02 16:00:45.141 -07:00: vmware-view 10428| TaskCombiner: CdkGetConfigurationTask(FAIL) removed, group task num:1, total task num:2.

Apr 02 16:00:45.141 -07:00: vmware-view 10428| -[CdkWindowController errorCallback:forTask:], CdkSetLocaleTask, type: 6, task error: Error: Couldn't connect to server, domain:cdk-curl-error-quark, code:7

Apr 02 16:00:47.885 -07:00: vmware-view 10428| -[CdkWindowController resetAutoReconnect], networkReachability is nil : 1 , autoReconnect : init

Apr 02 16:00:47.887 -07:00: vmware-view 10428| Disconnecting from broker https://vdi.meddata.com:443/broker/xml

Apr 02 16:00:47.887 -07:00: vmware-view 10428| CdkUtil_SetLocalAddress: fd -1 < 0, not retrieving local address.

Apr 02 16:01:17.492 -07:00: vmware-view 10428| Using OpenSSL 1.0.2p  14 Aug 2018

Apr 02 16:01:17.519 -07:00: vmware-view 10428| Using libcurl/7.61.1 OpenSSL/1.0.2p zlib/1.2.11

Apr 02 16:01:23.028 -07:00: vmware-view 10428| CdkUtil_SetIpProtocolUsage: setting Dual as the addressing mode.

Apr 02 16:01:23.124 -07:00: vmware-view 10428| -[CdkWindowController serverTypeAction:]: Server type is View. Launching the broker session...

Apr 02 16:01:23.126 -07:00: vmware-view 10428| TaskCombiner: CdkGetLaunchItemsTask(TODO) added, group task num:1, total task num:3.

Apr 02 16:01:23.127 -07:00: vmware-view 10428| TaskCombiner: CdkGetUserGlobalPreferencesTask(TODO) added, group task num:2, total task num:4.

Apr 02 16:01:23.499 -07:00: vmware-view 10428| TaskCombiner: CdkGetTunnelConnectionTask(TODO) added, group task num:3, total task num:5.

Apr 02 16:01:23.499 -07:00: vmware-view 10428| TaskCombiner: Group Tasks(3):CdkGetLaunchItemsTask(TODO),CdkGetUserGlobalPreferencesTask(TODO),CdkGetTunnelConnectionTask(TODO),

Apr 02 16:01:23.502 -07:00: vmware-view 10428| TaskCombiner: CdkGetConfigurationTask(TODO) added, group task num:1, total task num:6.

Apr 02 16:01:23.503 -07:00: vmware-view 10428| TaskCombiner: CdkSetLocaleTask(TODO) added, group task num:2, total task num:7.

Apr 02 16:01:23.503 -07:00: vmware-view 10428| TaskCombiner: Group Tasks(2):CdkGetConfigurationTask(TODO),CdkSetLocaleTask(TODO),

Apr 02 16:01:23.503 -07:00: vmware-view 10428| TaskCombiner: CreateRequest for CdkSetLocaleTask(REDY).

Apr 02 16:01:23.505 -07:00: vmware-view 10428| Send request successful: 0x604000a7c780

Apr 02 16:01:23.510 -07:00: vmware-view 10428| CdkUtil_SetLocalAddress: address ::1 is either a loopback or a wildcard address, not using it.

Apr 02 16:01:23.517 -07:00: vmware-view 10428| CdkRpc_HandleResponsesAsync: Handle Response with rpc call id: 3.

Apr 02 16:01:23.517 -07:00: vmware-view 10428| Got a response to request 3.

Apr 02 16:01:23.517 -07:00: vmware-view 10428| TaskCombiner: CdkGetLaunchItemsTask(FAIL) removed, group task num:2, total task num:6.

Apr 02 16:01:23.517 -07:00: vmware-view 10428| TaskCombiner: CdkGetUserGlobalPreferencesTask(FAIL) removed, group task num:1, total task num:5.

Apr 02 16:01:23.517 -07:00: vmware-view 10428| TaskCombiner: CdkGetTunnelConnectionTask(FAIL) removed, group task num:0, total task num:4.

Apr 02 16:01:23.517 -07:00: vmware-view 10428| TaskCombiner: CdkGetConfigurationTask(FAIL) removed, group task num:1, total task num:3.

Apr 02 16:01:23.517 -07:00: vmware-view 10428| -[CdkWindowController errorCallback:forTask:], CdkSetLocaleTask, type: 6, task error: Error: Couldn't connect to server, domain:cdk-curl-error-quark, code:7

Apr 02 16:01:25.568 -07:00: vmware-view 10428| -[CdkWindowController resetAutoReconnect], networkReachability is nil : 1 , autoReconnect : init

Apr 02 16:01:25.570 -07:00: vmware-view 10428| Disconnecting from broker https://desktop.meddata.com:443/broker/xml

Apr 02 16:01:25.570 -07:00: vmware-view 10428| CdkUtil_SetLocalAddress: fd -1 < 0, not retrieving local address.

Apr 02 16:01:51.384 -07:00: vmware-view 10428| CdkServiceUser_Open: /Applications/VMware Horizon Client.app/Contents/Library/Open VMware View Client Services exit status 256.

Apr 02 16:01:51.390 -07:00: vmware-view 10428| CdkServiceUser_Open failed with error -1.

Apr 02 16:01:52.785 -07:00: vmware-view 10428| CdkServiceUser_Open: /Applications/VMware Horizon Client.app/Contents/Library/Open VMware View Client Services exit status 256.

Apr 02 16:01:52.786 -07:00: vmware-view 10428| CdkServiceUser_Open failed with error -1.

Apr 02 16:02:23.011 -07:00: vmware-view 10428| CdkUtil_SetIpProtocolUsage: setting Dual as the addressing mode.

Apr 02 16:02:23.137 -07:00: vmware-view 10428| -[CdkWindowController serverTypeAction:]: Server type is View. Launching the broker session...

Apr 02 16:02:23.142 -07:00: vmware-view 10428| TaskCombiner: CdkGetLaunchItemsTask(TODO) added, group task num:1, total task num:4.

Apr 02 16:02:23.144 -07:00: vmware-view 10428| TaskCombiner: CdkGetUserGlobalPreferencesTask(TODO) added, group task num:2, total task num:5.

Apr 02 16:02:23.557 -07:00: vmware-view 10428| TaskCombiner: CdkGetTunnelConnectionTask(TODO) added, group task num:3, total task num:6.

Apr 02 16:02:23.557 -07:00: vmware-view 10428| TaskCombiner: Group Tasks(3):CdkGetLaunchItemsTask(TODO),CdkGetUserGlobalPreferencesTask(TODO),CdkGetTunnelConnectionTask(TODO),

Apr 02 16:02:23.559 -07:00: vmware-view 10428| TaskCombiner: CdkGetConfigurationTask(TODO) added, group task num:1, total task num:7.

Apr 02 16:02:23.560 -07:00: vmware-view 10428| TaskCombiner: CdkSetLocaleTask(TODO) added, group task num:2, total task num:8.

Apr 02 16:02:23.560 -07:00: vmware-view 10428| TaskCombiner: Group Tasks(2):CdkGetConfigurationTask(TODO),CdkSetLocaleTask(TODO),

Apr 02 16:02:23.560 -07:00: vmware-view 10428| TaskCombiner: CreateRequest for CdkSetLocaleTask(REDY).

Apr 02 16:02:23.562 -07:00: vmware-view 10428| Send request successful: 0x604000074d40

Apr 02 16:02:23.567 -07:00: vmware-view 10428| CdkUtil_SetLocalAddress: address ::1 is either a loopback or a wildcard address, not using it.

Apr 02 16:02:23.573 -07:00: vmware-view 10428| CdkRpc_HandleResponsesAsync: Handle Response with rpc call id: 4.

Apr 02 16:02:23.573 -07:00: vmware-view 10428| Got a response to request 4.

Apr 02 16:02:23.573 -07:00: vmware-view 10428| TaskCombiner: CdkGetLaunchItemsTask(FAIL) removed, group task num:2, total task num:7.

Apr 02 16:02:23.573 -07:00: vmware-view 10428| TaskCombiner: CdkGetUserGlobalPreferencesTask(FAIL) removed, group task num:1, total task num:6.

Apr 02 16:02:23.573 -07:00: vmware-view 10428| TaskCombiner: CdkGetTunnelConnectionTask(FAIL) removed, group task num:0, total task num:5.

Apr 02 16:02:23.573 -07:00: vmware-view 10428| TaskCombiner: CdkGetConfigurationTask(FAIL) removed, group task num:1, total task num:4.

Apr 02 16:02:23.573 -07:00: vmware-view 10428| -[CdkWindowController errorCallback:forTask:], CdkSetLocaleTask, type: 6, task error: Error: Couldn't connect to server, domain:cdk-curl-error-quark, code:7

Apr 02 16:02:30.265 -07:00: vmware-view 10428| -[CdkWindowController resetAutoReconnect], networkReachability is nil : 1 , autoReconnect : init

Apr 02 16:02:30.267 -07:00: vmware-view 10428| Disconnecting from broker https://desktop.meddata.com:443/broker/xml

Apr 02 16:02:30.267 -07:00: vmware-view 10428| CdkUtil_SetLocalAddress: fd -1 < 0, not retrieving local address.

Apr 02 16:02:52.535 -07:00: vmware-view 10428| CdkUtil_SetIpProtocolUsage: setting Dual as the addressing mode.

Apr 02 16:02:52.598 -07:00: vmware-view 10428| -[CdkWindowController serverTypeAction:]: Server type is View. Launching the broker session...

Apr 02 16:02:52.602 -07:00: vmware-view 10428| TaskCombiner: CdkGetLaunchItemsTask(TODO) added, group task num:1, total task num:5.

Apr 02 16:02:52.603 -07:00: vmware-view 10428| TaskCombiner: CdkGetUserGlobalPreferencesTask(TODO) added, group task num:2, total task num:6.

Apr 02 16:02:52.912 -07:00: vmware-view 10428| TaskCombiner: CdkGetTunnelConnectionTask(TODO) added, group task num:3, total task num:7.

Apr 02 16:02:52.912 -07:00: vmware-view 10428| TaskCombiner: Group Tasks(3):CdkGetLaunchItemsTask(TODO),CdkGetUserGlobalPreferencesTask(TODO),CdkGetTunnelConnectionTask(TODO),

Apr 02 16:02:52.914 -07:00: vmware-view 10428| TaskCombiner: CdkGetConfigurationTask(TODO) added, group task num:1, total task num:8.

Apr 02 16:02:52.915 -07:00: vmware-view 10428| TaskCombiner: CdkSetLocaleTask(TODO) added, group task num:2, total task num:9.

Apr 02 16:02:52.915 -07:00: vmware-view 10428| TaskCombiner: Group Tasks(2):CdkGetConfigurationTask(TODO),CdkSetLocaleTask(TODO),

Apr 02 16:02:52.915 -07:00: vmware-view 10428| TaskCombiner: CreateRequest for CdkSetLocaleTask(REDY).

Apr 02 16:02:52.917 -07:00: vmware-view 10428| Send request successful: 0x604001a723c0

Apr 02 16:02:52.930 -07:00: vmware-view 10428| CdkRpc_HandleResponsesAsync: Handle Response with rpc call id: 5.

Apr 02 16:02:52.931 -07:00: vmware-view 10428| Got a response to request 5.

Apr 02 16:02:52.933 -07:00: vmware-view 10428| TaskCombiner: CdkGetLaunchItemsTask(FAIL) removed, group task num:2, total task num:8.

Apr 02 16:02:52.933 -07:00: vmware-view 10428| TaskCombiner: CdkGetUserGlobalPreferencesTask(FAIL) removed, group task num:1, total task num:7.

Apr 02 16:02:52.934 -07:00: vmware-view 10428| TaskCombiner: CdkGetTunnelConnectionTask(FAIL) removed, group task num:0, total task num:6.

Apr 02 16:02:52.935 -07:00: vmware-view 10428| TaskCombiner: CdkGetConfigurationTask(FAIL) removed, group task num:1, total task num:5.

Apr 02 16:02:52.936 -07:00: vmware-view 10428| -[CdkWindowController errorCallback:forTask:], CdkSetLocaleTask, type: 6, task error: Error: Couldn't connect to server, domain:cdk-curl-error-quark, code:7

Apr 02 16:02:54.333 -07:00: vmware-view 10428| -[CdkWindowController resetAutoReconnect], networkReachability is nil : 1 , autoReconnect : init

Apr 02 16:02:54.339 -07:00: vmware-view 10428| Disconnecting from broker https://desktop.meddata.com:443/broker/xml

Apr 02 16:02:54.339 -07:00: vmware-view 10428| CdkUtil_SetLocalAddress: fd -1 < 0, not retrieving local address.

Apr 02 16:02:55.271 -07:00: vmware-view 10428| -[CdkWindowController presentBrokerPrompt]

Apr 02 16:02:57.141 -07:00: vmware-view 10428| CdkUtil_SetIpProtocolUsage: setting Dual as the addressing mode.

Apr 02 16:02:57.240 -07:00: vmware-view 10428| -[CdkWindowController serverTypeAction:]: Server type is View. Launching the broker session...

Apr 02 16:02:57.249 -07:00: vmware-view 10428| TaskCombiner: CdkGetLaunchItemsTask(TODO) added, group task num:1, total task num:6.

Apr 02 16:02:57.249 -07:00: vmware-view 10428| TaskCombiner: CdkGetUserGlobalPreferencesTask(TODO) added, group task num:2, total task num:7.

Apr 02 16:02:57.570 -07:00: vmware-view 10428| TaskCombiner: CdkGetTunnelConnectionTask(TODO) added, group task num:3, total task num:8.

Apr 02 16:02:57.570 -07:00: vmware-view 10428| TaskCombiner: Group Tasks(3):CdkGetLaunchItemsTask(TODO),CdkGetUserGlobalPreferencesTask(TODO),CdkGetTunnelConnectionTask(TODO),

Apr 02 16:02:57.572 -07:00: vmware-view 10428| TaskCombiner: CdkGetConfigurationTask(TODO) added, group task num:1, total task num:9.

Apr 02 16:02:57.573 -07:00: vmware-view 10428| TaskCombiner: CdkSetLocaleTask(TODO) added, group task num:2, total task num:10.

Apr 02 16:02:57.573 -07:00: vmware-view 10428| TaskCombiner: Group Tasks(2):CdkGetConfigurationTask(TODO),CdkSetLocaleTask(TODO),

Apr 02 16:02:57.573 -07:00: vmware-view 10428| TaskCombiner: CreateRequest for CdkSetLocaleTask(REDY).

Apr 02 16:02:57.575 -07:00: vmware-view 10428| Send request successful: 0x600000e61540

Apr 02 16:02:57.586 -07:00: vmware-view 10428| CdkRpc_HandleResponsesAsync: Handle Response with rpc call id: 6.

Apr 02 16:02:57.586 -07:00: vmware-view 10428| Got a response to request 6.

Apr 02 16:02:57.586 -07:00: vmware-view 10428| TaskCombiner: CdkGetLaunchItemsTask(FAIL) removed, group task num:2, total task num:9.

Apr 02 16:02:57.586 -07:00: vmware-view 10428| TaskCombiner: CdkGetUserGlobalPreferencesTask(FAIL) removed, group task num:1, total task num:8.

Apr 02 16:02:57.586 -07:00: vmware-view 10428| TaskCombiner: CdkGetTunnelConnectionTask(FAIL) removed, group task num:0, total task num:7.

Apr 02 16:02:57.586 -07:00: vmware-view 10428| TaskCombiner: CdkGetConfigurationTask(FAIL) removed, group task num:1, total task num:6.

Apr 02 16:02:57.586 -07:00: vmware-view 10428| -[CdkWindowController errorCallback:forTask:], CdkSetLocaleTask, type: 6, task error: Error: Couldn't connect to server, domain:cdk-curl-error-quark, code:7

Apr 02 16:03:00.478 -07:00: vmware-view 10428| -[CdkWindowController resetAutoReconnect], networkReachability is nil : 1 , autoReconnect : init

Apr 02 16:03:00.480 -07:00: vmware-view 10428| Disconnecting from broker https://vdi.meddata.com:443/broker/xml

Apr 02 16:03:00.480 -07:00: vmware-view 10428| CdkUtil_SetLocalAddress: fd -1 < 0, not retrieving local address.

I've seen a couple posts on this but I haven't seen an answer that seems to fit my issue. We have had random issues in the past with Group Policies not running on login but it seems like recently we have been getting a lot more reports of it (It is still inconsistent though) and it appears to specifically be our Machine-Targeted policies that are failing to load. In the last 2 months we have upgraded our View environment from 7.4 to 7.10 and also turned on Cloud Pod architecture. Here is the basic info on our environment:

Cloud Pod:

• 2 Sites with 1 Pod in each Site
• 6 Production Global Entitlements
• 4 Entitlements using Home Sites (2 in the remote site and 2 in the main site)

System Layout:

• 2 Data Centers (each are a separate Site in Cloud Pod)
• 4 UAGs (2 in each DC) for external connections
• 4 Connection Servers (2 in each DC)
• 2 Composer Servers (1 in each DC)
• SQL Availability Group (2 members)

Agent VMs

• Windows 7
• Profile Management: Liquidware Labs Profile Unity

I tried adding the GpNetworkStartTimeoutPolicyValue reg entry (with a 45 second value) as Microsoft recommended and also enabled the "Always wait for the network at startup and logon" local group policy (both in a test pool) but I am still getting inconsistent GP loads. Any suggestions would be appreciated.

Thanks!