Quantcast
Channel: VMware Communities : Discussion List - VMware View
Viewing all 10683 articles
Browse latest View live
↧

VSAN and Horizon View 6: PBM error on pool

January 22, 2015, 2:26 am
$
0
0

Hi all,

 

I have an Horizon View 6 production envinronment (vCenter 5.5U2). Last month I have enabled VSAN on this vCenter and all seems green. I have created a new pool that points on vsandatastore for VMs provisioning, but after a minute, the pool goes disabled. The error is "Error during provisioning: PBM Subsystem couldn't be initialized."

 

I have searched on this forum and I have found only a post, but the error seems different.

 

I have noticed that, when I try to view the datastores list during pool creation, I receive an error like "java.lang.null.pointer.exception" (and I have noticed that the column Overcomittment is not present). After closed this popup, I select the datastore and press OK. But after a minute, when View Composer try the provisioning, I receive the error listed before.

 

Any idea?

 

Thanks to all!

 

Matrix

↧
Search

Pooled machines on different snapshots after recompose

October 2, 2013, 9:01 am
$
0
0

I have 8 different non-persistent pools all with different base images. My two oldest pools and the ones I have recomposed the most times I noticed users' machines being inconsistent. I then found under Inventory and the Desktop (View Composer Details) view it displays what snapshot image they are running off of. I then noticed different machines were off of different images. Some of them being snapshots that didn't even exist anymore. I attached screenshots to show what I mean. I am wondering how could this happen that some machines did not recompose from the snapshot I told the pool to and they stayed where they were, and through multiple composures. If I delete those machines the pool recreates another with the correct snapshot but I feel I shouldn't have to do this type of clean up. Does anybody know what could be causing this inconsistency? I looked through the event logs and didn't see any error during the recomposure process.

↧
↧

Failed to mount persistent disk - Trying to deploy first desktop pool and failing. - View Composer agent initialization failed

January 22, 2015, 7:15 am
$
0
0

Hello all,

 

Full errors:

 

 

View Composer agent initialization state error (22): Failed to mount persistent disk. Please check the parent VM if an existing disk is using the same drive letter. (waited 0 seconds)

 

Pairing state:In pairing...

Configured by:xxx.xxx.xxx.local

Attempted theft by:

 

 

 

Provisioning error occurred for Machine xxx: View Composer agent initialization failed

 

 

 

I am currently rolling out VMWare view for the first time in a test environment and have hit an issue I have not been able to work around despite various google searches and trial and error.

Hoping someone here could suggest something.

 

VMWare view versions are all 6.0.1.

vCenter is on an appliance.

VMWare view connection manager is on a server 2012 R2 VM.

VMWare view composer is on a seperate server 2012 R2 VM.

I have an SQL server 2012 install on a separate server 2012 R2 VM.

 

SQL databases have been configured for the view composer to be able to reach it, it is using ODBC 64-bit via SQL Server Native Client 11.0.

I have tried troubleshooting this by swapping to 32-bit but this did not connect, so seems 64-bit is correct.

 

I have a windows 7 64-bit enterprise VM as my golden image. It has VMWare tools on it and VMWare agent on it.

The VM had ipconfig/release performed on it, it was then shut-down and a snapshot taken as my source.

 

The issue is that when I go to deploy a desktop pool I am getting the error shown above.

If I connect to the created VM via vCenter the persistent and temporary drives show fine.

 

Based on the error I have tried various adjustments such as changing the path for the VMs DVD drive from D: to Z:, spreading the persistant and temporary drives over multiple data-stores or single data-stores and even removing the VMs DVD drive altogether. I have also looked at the logs under view composer but can find nothing to explain the behaviour.

 

SQL server seems to be working for the setup as error logs are going through and the VMs themselves are being created and added to AD as intended.

I should note the VMs are being done as linked clones.

 

Can anyone offer a clue as to the cause or something I can check please, have done all the areas I can think of and googling the error does not come up with anything helpful so far.

 

Thanks,

↧

Horizon View with Novell Domain Services for Windows (DSFW)

January 22, 2015, 11:08 am
$
0
0

I am planning on upgrading my Horizon View installation to 6.0.x. I'm currently running View 5.0 with DSFW 11.2, Window 7SP1-64 and ZCM 11.2a

Has anyone tried to use DSFW 11.2 with VMware View 6 or higher? Have you had any issues getting them configured together? If so, what did you do to resolve them?

As additional information, I will also be upgrading to Win 8.1 and using ZCM 11.3a

↧

Hello, I am experiencing an issue with the ..v2 folder creating a duplicate appdata folder inside a hidden folder {string of characters}.

January 22, 2015, 12:42 pm
$
0
0

Recently we were experiencing high log on times and frequent renaming/deleting of user's View Persona related folders. I have seen a users Persona folder create duplicate AppData folders. It would creat it insode the VIew Persona folder where the original AppData is located. It would create it in a hidden folder with a name like {string of characters}, for example. Weare on version 5.3.0 of View. Has anyone experienced something similar?

↧
↧

Parent or Gold image for Floating desktop default profile configuration

January 22, 2015, 1:33 pm
$
0
0

Hello,

Recently, we had a lot of changes on our gold/parent images in regards to applications for use in electronic medical records. We are experiencing log on times ranging from 10 seconds to 5 minutes. I wanted to see if anyone knows the procedure for modifying the default profile on a Windows 7 32-bit parent/gold image? I have seen articles and also the Admin guide from VMware but have not been able to correctly configure it. Any assistance would be helpful.

↧

Local Mode losing VT-x support

January 22, 2015, 2:05 pm
$
0
0

I am trying to check out a 64-bit Windows 7 VM to run in Local Mode with the Horizon View client. This Windows 7 VM has VMwere Player installed which hosts a 64-bit Ubuntu Linux. On the vSphere server environment I have enabled exposing hardware virtualization (VT-x) for this Win 7 VM so that its nesting 64-bit Ubuntu VM can run. But once I have checked out this Win 7 VM to run in Local Mode, it has lost support of exposing VT-x so its nesting 64-bit Ubuntu would not run in the Player. The setting on the Win 7 VM of exposing VT-x (set on the vSphere server environment) seems to have been lost once this VM has been checked out to the Local Mode environment. Or maybe the View Client with Local Mode does not support the checked out VMs to expose VT-x? I am very sure that I have enabled VT-x in the BIOS of my client computer which runs the View Client with Local Mode.

 

To make what I said simpler:

vSphere (1)   >>>   Contains a 64-bit Win 7 VM (2)   >>>   Has VMware Player (3) installed  >>>   Contains a 64-bit Ubuntu (4)

"Expose hardware assisted virtualization to the guest OS" (VT-x) has been set on (2) so that (3) can run (4). But when (2) has been checked out to Local Mode, it does not expose VT-x any more so that (3) cannot run (4).

 

vSphere 5.5

Windows 7 VM version 9

View server 5.3.2

View Client with Local Mode 5.4

↧

Is there a limit to the number of View Connection Servers per license?

January 22, 2015, 2:35 pm
$
0
0

We would like to setup a second view connection server in our VDI environment to limit downtime during maintenance windows.  I've been unable to find a definitive answer as to whether or not we can have more than one View Connection server with a View license or if it's only one server per license?  Does anyone happen to know the answer to this or able to point me towards the correct documentation?

 

Thanks in advance for any replies!

↧
Search

Restricting View Agent registration

January 23, 2015, 1:46 am
$
0
0

Within the registry of a virtual machine I'm able to restrict the View Agent registration to a particular View Broker.

 

HKLM\SOFTWARE\VMware,Inc.\VMware VDM\Agent\Configuration\Broker

 

But after a restart the configuration is changed back to default settings. Is there an way to fix the configuration setting and let the View Agent only communicate with one View Broker?

 

Arjan

↧
↧

Stop Provisioning on Error - Best practice?

November 28, 2014, 1:03 am
$
0
0

Hi,

 

We ONLY have non-persistent pools, non-replicated, destroyed on logout.

 

Just curious what are the caveats of turning this feature OFF on our pools.

Having this feature enabled has occasionally disabled the pool when there has been some sort of hiccup. This can be annoying when it's after 5pm, and the service might be down all night, just because 1 machine had a problem provisioning.

 

If we disable this setting, what might go wrong in our environment? DB gets messed up? Resource allocation goes out of control?

I'm trying to justify that the occasional all night pool downtime might be a better scenario over.... what? At the moment I'm thinking just disable it to have 100% uptime and avoid incidents on a Friday morning

↧

Blast SSL Cert Question

January 23, 2015, 6:24 am
$
0
0

I hope this question hasn't been asked before, and forgive me if it has. I searched before starting a new discussion...

 

Typically I have not used the PCoIP SG for any internal connections. Have not yet needed to. Only for External.

 

Well, we have had a new request to allow Blast connections internally. It would be my desire to also not tunnel this through the CS. The only issue is that doing a Direct Connection to a desktop using Blast is going to throw Cert warnings.

 

Is anyone doing direct connections using Web Client, and how have you overcome the cert warnings. Cert Warnings =

 

Thanks!

↧

NAT to Horizon view desktops

January 23, 2015, 10:05 am
$
0
0

Hi Guys,

 

Have an issue setting up a secure Horizon view environment in regards to NAT;

 

The security server is NAT'd publicly and works fine

The connection server is NAT'd to the Security server in the DMZ and works fine

 

The issue is that connections to horizon view desktops are always trying to use the INTERNAL IP of the machine and we would like to NAT them (sorry, this bit isn't open to discussion)

 

the agent gpo has a policy for using the DNS name for resolution of the horizon view desktop "Connect using DNS name" which appears to be for this very situation however the policy does not appear to be taking effect and the security server will always try to use the internal IP (security server can only access the vdi desktop by NAT'd address).

 

Does anyone know how to force this behavior for the security server?

↧

vCops for View - physical device data, and ports

January 23, 2015, 11:29 am
$
0
0

Does anyone know how metrics from physical devices (laptops/desktops) gets reported to vCOps? or vCops for View if it matters. View 5.2, vCops for View 1.7, vCops 5.8.2.

 

I don't see any port listings that indicate the physical device talks directly to the Analytics VM, so I'm guessing it either talks to the V4H broker agent on the connection server (but don't know which port it would use), or reports to the VM and the VM reports to Analytics. But I can't find any actual documentation. netstat -nao shows an active connection from the VM to the CS on 3092 which matches the port documentation, but I see nothing to the CS from my laptop on 3091 - 3094.

↧
↧

Removing a parent domain in vdmadmin

January 23, 2015, 11:33 am
$
0
0

All,

 

I have a test bed and want to remove a parent domain since I do not have the AD available to me... for example..

 

aaa.domain.com (would like to remove)

bbb.aaa.domain.com

 

however, when i use vdmadmin to remove said domain, it still shows up in view even though its part of the cluster exclude and broker exclude lists. Really confused.

↧

Horizon View - Powershell cmd for Description

January 23, 2015, 12:10 pm
$
0
0

Hello,

 

Currently using:

5.2.0 Build-987719

 

I have had success using the Get-DesktopVM and Get-Pool commandlets for PowerShell.  Is there any commandlet that will reveal the "Description" field that I can enter from the pools view on VM Admin?  For example if you navigate from the VM Admin Window > Inventory > Pools > <poolID> there is a Description area where we have notes on the pool.  I'd love to retrieve that info so I can use it for further processing in additional systems.

 

Please let me know if you need more information.  Attached is a screenshot of the VM Admin window and the area I am concerned about.

↧
Search

SSO not working when logging into Win7 VM - Second login required

January 23, 2015, 1:56 pm
$
0
0

Created new Windows 7 desktop in a linked-clone pool. Using the View Client to access the new VM, I am prompted a second time with the Windows 7 login. It is not passing the credentials through for the SSO login to Windows.

 

Using this document (KB 1029391) I have checked the following:

To troubleshoot issues when using SSO in a VMware View Environment:

  1. Confirm that the Agent/Client installation or configuration is correct. During installation, select Log in as current user.
    1. This is set in the Client, have tried using both HTML and Client to access, same result. Prompted with Windows login after a successful VMware login.
  2. Verify that disclaimers or login banners are not being used when using PCoIP as the display protocol. For more information, see Black View Client log in screen when using PCoIP (1016961).
    1. No banners or notices are being used or see, there is also no 'black view' symptom.
  3. Confirm that userinit is configured properly to pass credentials. For more information, see Confirming that the userinit string is configured properly (1028975).
    1. Checked and double checked. Copy?pasted right from this document without a change in symptoms.
  4. Confirm that the GINA is chaining correctly. For more information, see Confirming that the GINA is chaining correctly in VMware View Manager 3.x/4.0.x/4.5.x (1029075).
    1. The KB article says this does not apply to Windows 7 desktops.
  5. Ensure that no Group Policy conflict exists. For more information, see Ensuring that there are no conflicts between Group Policy Objects and View virtual desktops (1027446).
    1. Have spent hours looking through the policies using RSOP.MSC, cannot find anything that would seem to be related to the login process.
  6. Ensure that the Interactive logon: Do not require CTRL+ALT+DEL GPO policy is disabled. For more information, see Single Sign-on does not work in VMware View Desktops (1026797).
    1. This was also checked and set correctly.


I also checked the setting mentioned in KB 1019466:

On Windows Vista, if you install the PCoIP Server component, the Windows group policy Disable or enable software Secure Attention Sequence is enabled and set to Services and Ease of Access applications. If you change this setting, single sign-on does not work correctly.  Ensure that the Windows group policy Disable or enable software Secure Attention Sequence is enabled and set to Services and Ease of Access applications. This is also set as stipulated here.

 

Anyone have any ideas? I've spent an embarrassing amount of time on this and have not come any closer to getting the SSO to work. I must be missing something -but what?

↧

VMware Horizon View Client/Blast Customize Domain Selection

January 24, 2015, 7:29 am
$
0
0

Hi Guys,

 

 

 

I'm using VMware Horizon View for 2 different Domains using 2-way trust. When users login through View Client or through VMware View Blast, they can see multiple domains and they have to make selection of their own domain.

 

Is there a way we can set domain for particular domain or is there a way to hide to different domain users?

 

Regards,

 

MQ

↧
↧

Unable to storage vmotion VM's with PCI passthrough graphics card

March 17, 2014, 9:35 am
$
0
0

Hi, if I try to storage vmotion (datastore only) a VM which has a passthrough GPU (specifically, Grid K1), I receive the message:

 

"Virtual maching is configured to use a device that prevents the operation: Device 'PCI Device 0' has a backing type that is not supported. This is a general limitation of the virtual machine's compatibility with the ESXi version of the selected host"

 

Can anyone tell me, is this expected behavior? I assumed since it is staying on the same host that I should be able to storage vmotion it without issue. Thanks.

↧

Internet Explorer 8 on Windows 7 sp1 wont start after installing ViewAgnet v6

January 24, 2015, 3:25 am
$
0
0

Hi, we are looking at VMware view 6 but we have an issue where after installing the viewagent version 6 on a Windows 7 32bit box that is fully updated with latest updates IE8 will not start anymore. It starts on the version 5 client and the agent is being installed using a local administration account.

 

Everything else appears to work.

 

If we click on the IE icon nothing, not even in the process shows in the task manager.

 

 

Any ideas as due to business reasons we can't upgrade IE yet?

↧

NAT device between Security Server and Connection Manger - View 4.6

November 23, 2011, 6:57 pm
$
0
0

Hi All,

 

I am in the process of deploying a view 4.6 environment - with a view Security Server within the DMZ.

 

The DMZ is a fully NAT'd and isolated network (single fire-wall, 3-leg configuration - GB-2000 is the model of firewall).


At this point I am just trying to get RDP to work with this configuration.

 

The firewall configuration is as follows:

- Security Server IP - 10.1.1.49/24

- Alias created for View Connection Server - 10.1.1.100 (NAT IP)

- NAT Tunnel (with ports 8009 and 4001) created between View Connection Server alias and View Connection Server actual IP 10.2.2.229

- Alias created for View Desktop - 10.1.1.101 (NAT IP)

- NAT Tunnel (with ports 3389) created between View Desktop alias and View Destop actual IP 10.2.2.239

 

I can RDP directly from the Security Server to the View desktop (via the 'alias' IP 10.1.1.101) succesfully.

I can connect succesfully from the internal network (via the actual desktop IP 10.2.2.239).

When I try to connect via the Security Server (from external) I get initial connection to connection manager, and I can select the pool to logon to. However I am unable to launch a desktop session. The error I get is "The desktop is currently not available".

 

In the event logs on the connection manager server I can see that the actual IP address (10.2.2.239) is being used to connect to the view desktop - which will not work in this scenario (the 10.1.1.101 alias must be used).

 

Has anyone deployed a View Security server in this scenario?

 

Thanks in advance!

↧
Viewing all 10683 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>